Llama - Face 1

Llama - Face 1

  • $2.00
Tax included. Shipping calculated at checkout.

Only 2 left!

  • Laser printed- NO SEALING NEEDED
  • Thick Waterslide paper:  Clear
  • Size on the longest side: 
    • Large 3.5" for tumblers and other projects.
  • Clear waterslides can only be used on a light-colored surface. Clear decals will not be seen on a dark surface.  Edges left around the image won't show as it is clear.
  • Please note - printer does not print white ink.  If the image you chose has white ink, the white section will be clear and show whatever color base you are using.
  • Final colors may vary slightly
  • This is a physical item that will be shipped to you -Not a digit copy and not a sticker

 

INSTRUCTIONS - HOW TO USE:

  1. Cut out the image, if needed.
  2. Place it in warm water for approx. 30 seconds.
  3. Take out the soaked decal and place it onto the desired surface with the image facing up. 
  4. Once the decal is placed, gently remove the backing underneath by slipping it off the decal.
  5. Position the decal in the desired spot then gently remove any excess water and wrinkles underneath with a damp paper towel or a squeegee.
  6. Let completely dry naturally (3-4 hours) before adding epoxy.

We Also Recommend